Chris Reeve Large Sebenza 31 Inlay L31-1222 open — CPM MagnaCut Insingo, sandblasted titanium, natural canvas Micarta inlay, Reeve Integral Lock

Chris Reeve Sebenza 31 L31-1222 CPM MagnaCut Insingo — hollow grind, 3.61 in, 0.12 in thick, 63-64 HRC, stonewashed, plain edge

hris Reeve Sebenza 31 L31-1222 natural canvas Micarta inlay close-up — woven textile surface, sandblasted 6AL4V titanium frame, tip-up clip

Chris Reeve Sebenza 31 L31-1222 sandblasted titanium natural canvas Micarta inlay — 0.55 in thick, warm tan woven textile, Reeve Integral Lock

Chris Reeve Large Sebenza 31 Inlay - 3.61" CPM MagnaCut Stonewashed Hollow Grind Insingo Plain Blade, Sandblasted 6AL4V Titanium Handle, Natural Canvas Micarta Inlay - L31-1222

SKU: L31-1222- 66

Chris Reeve

$600.00

Overview
Warranty Information

Product Description

The Chris Reeve Large Sebenza 31 Inlay L31-1222 is the working knife's Sebenza — Natural Canvas Micarta inlays on a sandblasted 6AL4V titanium chassis, CPM MagnaCut Insingo at 63-64 HRC, hollow grind, Reeve Integral Lock with ceramic ball interface. Where the Bog Oak Inlay (L31-1130) is the boardroom Sebenza, the L31-1222 is the one you carry hard. Natural Canvas Micarta adds grip and grit to the most precise production folder made in the USA — and at $600.00 with a Insingo blade built for serious cutting, it earns the description. DOB January 29, 2026. Made in Boise, Idaho.

The blade is ground from CPM MagnaCut at 63-64 HRC — Crucible's particle metallurgy stainless steel engineered to simultaneously deliver edge retention, toughness, and corrosion resistance. The Insingo profile is the slicing configuration of the Sebenza 31 lineup: a curved spine sweeping toward a refined tip, delivering a primary edge that engages through the full cutting stroke for food preparation, rope cutting, and the full range of daily utility tasks. The deep hollow grind at 0.12" thin maximizes the cutting geometry behind the edge. The stonewashed finish wears well through hard carry and use.

The handle pairs sandblasted 6AL4V titanium with Natural Canvas Micarta inlays. Canvas Micarta is woven canvas fabric impregnated with resin and cured under pressure — the natural (undyed) colorway produces a warm tan character with a fine woven textile surface that grips securely in wet or dry conditions and develops a carry patina over time. At 0.55" handle thickness — meaningfully thicker than the plain titanium Sebenza variants — the Micarta inlay adds both material depth and tactile grip to the handle. Sandblasted titanium on the frame provides the CRK baseline precision chassis. The Reeve Integral Lock is machined directly from the titanium frame as an integral component; the ceramic ball interface ensures wear-free, zero-play lockup over a lifetime. Tip-up right carry. Made in Boise, Idaho, USA.

Steel: CPM MagnaCut particle metallurgy stainless steel, 63-64 HRC — edge retention, toughness, and corrosion resistance simultaneously; hollow grind at 0.12" thin for superior slicing geometry; stonewashed finish
Blade: 3.61" Insingo profile, hollow grind, stonewashed finish, plain edge — curved spine for full curved edge engagement; slicing-optimized; 8.40" overall open
Handle: Sandblasted 6AL4V titanium with Natural Canvas Micarta inlays — warm tan woven textile composite; secure grip wet or dry; develops carry patina; 0.55" handle thickness, 4.79" closed
Lock: Reeve Integral Lock with ceramic ball interface — machined from 6AL4V titanium frame as integral component; ceramic ball between lock bar and tang; wear-free, zero-play lockup
Clip: Tip-up right carry; working-carry Sebenza Inlay configuration — the Natural Canvas Micarta is the practical choice vs. exotic Bog Oak inlays
Carry: 4.7 oz; DOB January 29, 2026; made in Boise, Idaho USA — Chris Reeve Knives; CRK lifetime guarantee

Sebenza buyers who want the Insingo Inlay configuration with a rugged, practical material — Natural Canvas Micarta is the working-carry choice in the Sebenza Inlay series. Buyers who want the Insingo blade on an inlay Sebenza without the premium exotic material price of Bog Oak. CRK buyers who want a Sebenza they can carry hard and put to work without treating it as a display piece.

Knifeworks is an authorized Chris Reeve Knives dealer — order the Chris Reeve Large Sebenza 31 Inlay L31-1222 online or call our team at 888-225-9775. Same or next business day shipping from Columbia, Louisiana, with the service Knifeworks is known for.

Specifications:

Product Type	Folding Knife
Product Brand	Chris Reeve
Product Line	Large Sebenza 31 Inlay
Item Number	L31-1222
Designer	Chris Reeve
Blade Length	3.61 inches
Blade Steel	CPM MagnaCut Particle Metallurgy Stainless Steel
Blade Hardness	63-64 HRC
Blade Thickness	0.12 inches
Blade Profile	Insingo
Blade Grind	Howllow
Edge Type	Plain Edge
Blade Finish	Stonewashed
Handle Material	6AL4V Titanium with Natural Canvas Micarta Inlays
Handle Finish	Sandblasted Titanium / Natural Canvas Micarta
Handle Thickness	0.55 inches
Lock Type	Reeve Integral Lock with Ceramic Ball Interface
Clip Position	Tip-Up, Right Carry
Overall Length	8.40 inches
Closed Length	4.79 inches
Weight	4.7 oz
Date of Birth	January 29, 2026
Origin	Made in USA (Boise, Idaho)
Blade Range	3.5-3.99

Warranty Information

Chris Reeve Knives provides a lifetime guarantee against defects in materials and workmanship. For warranty service, contact Chris Reeve Knives directly at chrisreeve.com.

Product Videos

Custom Field

Product Type Folding Knife

Product Brand Chris Reeve

Product Line Large Sebenza 31 Inlay

Item Number L31-1222

Designer Chris Reeve

Blade Length 3.61 inches

Blade Steel CPM MagnaCut Particle Metallurgy Stainless Steel

Blade Hardness 63-64 HRC

Blade Thickness 0.12 inches

Blade Profile Insingo

Blade Grind Howllow

Edge Type Plain Edge

Blade Finish Stonewashed

Handle Material 6AL4V Titanium with Natural Canvas Micarta Inlays

Handle Finish Sandblasted Titanium / Natural Canvas Micarta

Handle Thickness 0.55 inches

Lock Type Reeve Integral Lock with Ceramic Ball Interface

Clip Position Tip-Up, Right Carry

Overall Length 8.40 inches

Closed Length 4.79 inches

Weight 4.7 oz

Date of Birth January 29, 2026

Origin Made in USA (Boise, Idaho)

Blade Range 3.5-3.99

Product Reviews

Natural Canvas Micarta — The Working Insingo Sebenza

Woven canvas Micarta inlays on sandblasted 6AL4V titanium — warm tan, grippy wet or dry, develops carry patina. CPM MagnaCut Insingo at 63-64 HRC. The Sebenza Inlay you carry hard. DOB January 29, 2026. Made in Boise, Idaho USA.

CPM MagnaCut 63-64 HRC — Reeve Integral Lock

Crucible particle metallurgy at the top of production hardness. Deep hollow grind Insingo, stonewashed — the slicing configuration. Reeve Integral Lock with ceramic ball interface — wear-free, zero blade play. 4.7 oz, tip-up right.

Authorized Dealer — CRK Lifetime Guarantee

Knifeworks is an authorized Chris Reeve Knives dealer. Every L31-1222 purchased here carries CRK’s lifetime guarantee against defects in materials and workmanship — buy with confidence.

Same or Next Business Day Shipping

In-stock orders ship from Columbia, Louisiana. Questions? Call 888-225-9775 — our team carries these knives daily.

Chris Reeve Large Sebenza 31 Inlay L31-1222: Frequently Asked Questions

Common questions about the Chris Reeve Large Sebenza 31 CPM MagnaCut Insingo with Natural Canvas Micarta inlay, answered by the Knifeworks team.

What is Natural Canvas Micarta, and how does it perform as a Sebenza inlay material?

Canvas Micarta is a composite material made from layers of woven canvas fabric impregnated with resin and cured under high pressure. The natural (undyed) version produces a warm tan to khaki character with a fine woven textile surface that grips securely in both dry and wet conditions — the woven canvas texture provides mechanical grip that smooth materials cannot replicate. On the L31-1222, the Natural Canvas Micarta inlays are fitted flush into precision-machined recesses in the sandblasted 6AL4V titanium handle frame, adding both grip and visual warmth to the Sebenza chassis. Canvas Micarta develops a carry patina over time with use — the surface takes on a character from the oils and wear of regular handling that makes each knife distinct. At 0.55” handle thickness, the Micarta inlay adds measurable material depth to the handle.

How does the Natural Canvas Micarta inlay (L31-1222) compare to the Bog Oak inlay (L31-1130)?

Both are Large Sebenza 31 Inlay configurations with Reeve Integral Lock with ceramic ball interface, sandblasted or glass blasted 6AL4V titanium, made in Boise Idaho. The L31-1222 Natural Canvas Micarta Insingo is the practical, working-carry inlay — Micarta is a man-made composite that is highly durable, dimensionally stable, grips well wet or dry, and develops a patina with hard use. The L31-1130 Bog Oak Tanto is the exotic collector’s inlay — ancient peat-preserved wood, unique per piece, with premium gold hardware, priced at $650.00 vs. $600.00. Choose the L31-1222 if you want to carry the Inlay Sebenza hard; choose the L31-1130 if you want the most premium and visually distinctive configuration in the lineup.

Why does the L31-1222 have a 0.55-inch handle thickness when other Sebenza 31 variants are 0.15 inches?

The standard Large Sebenza 31 handle thickness of approximately 0.15 inches reflects the bare titanium frame dimensions. The L31-1222’s 0.55-inch handle thickness reflects the added material depth of the Natural Canvas Micarta inlays — the Micarta sits proud of the titanium frame surface and adds tactile depth to the grip. This is also why the Inlay Sebenza feels different in hand from a plain titanium Sebenza: the Micarta inlay adds a layer of natural material between the metal frame and your grip that changes the feel and the thermal character of the handle (Micarta is warmer in cold conditions than bare titanium).

What is the Insingo blade profile, and why is it particularly well-suited on the Inlay Sebenza?

The Insingo profile features a curved spine sweeping toward a refined fine tip, creating a belly-forward geometry where the full curved primary edge engages through the cutting stroke — the slicing-optimized blade configuration on the Sebenza platform. On the L31-1222, the Insingo pairs with Natural Canvas Micarta for a knife that is built to perform: the Insingo excels at the daily utility tasks — food prep, rope, packaging, all the cutting a hard-use EDC encounters — and the Micarta handle grips through all of them. The L31-1222 is the Sebenza Inlay configuration that earns its price through use rather than display.

What is the Reeve Integral Lock with ceramic ball interface on the Sebenza 31?

The Reeve Integral Lock (RIL) is machined directly from the 6AL4V titanium handle frame as an integral component — not a separate liner. A ceramic ball is seated between the titanium lock bar and the blade tang at the lockup point. Ceramic is harder and smoother than titanium, creating wear-free contact that prevents the metal-on-metal deformation that degrades conventional lock bars over time. Zero blade play in any direction results — the bank-vault lockup that has defined the Sebenza for decades. On the L31-1222, the RIL is machined in the same sandblasted titanium frame that houses the Micarta inlays.

What are the full specifications of the Chris Reeve Large Sebenza 31 Inlay L31-1222?

Blade length: 3.61 in. Blade thickness: 0.12 in. Handle thickness: 0.55 in. Overall open: 8.40 in. Closed length: 4.79 in. Weight: 4.7 oz. CPM MagnaCut, 63-64 HRC, hollow grind, Insingo, stonewashed, plain edge. Sandblasted 6AL4V titanium with Natural Canvas Micarta inlays. Reeve Integral Lock with ceramic ball interface. Tip-up right carry. DOB January 29, 2026. Made in Boise, Idaho USA. CRK lifetime guarantee. $600.00. Knifeworks ships same or next business day from Columbia, Louisiana — call 888-225-9775.

CPM MagnaCut 63-64 HRC · Hollow Grind Insingo · Stonewashed · Reeve Integral Lock Ceramic Ball · Sandblasted 6AL4V · Natural Canvas Micarta · 0.55 in Handle · 4.7 oz · DOB 01/29/2026 · Made in USA · CRK Lifetime Guarantee · Authorized Dealer

CPM MagnaCut at 63-64 HRC. Deep hollow grind Insingo. Natural Canvas Micarta inlays on sandblasted 6AL4V titanium. Reeve Integral Lock with ceramic ball. 4.7 oz. Made in Boise, Idaho. The Sebenza you carry hard.

Knifeworks is an authorized Chris Reeve Knives dealer. The Large Sebenza 31 Inlay L31-1222 ships same or next business day from Columbia, Louisiana, with CRK’s lifetime guarantee. Questions? Call 888-225-9775 — our team carries these knives daily.

Shop All Chris Reeve Knives at Knifeworks →