The glow-in-the-dark carbon fiber on the Jinn H213-6A-GLOCF integrates luminous material into the carbon fiber handle scales — a photoluminescent compound that absorbs ambient or UV light and re-emits it as a visible glow in low-light conditions. The CF is linerless, meaning the carbon fiber scales carry the full structural load of the handle without the steel liners found in most CF folders — keeping weight to 2.25 oz and handle thickness to 0.33 inches. The glow accents are a functional low-light orientation feature and the most visually distinctive build element in the Jinn lineup.

A linerless construction eliminates the steel liner plates that typically reinforce the inside of carbon fiber handle scales. Standard CF folders use steel liners to provide rigidity, anchor the lock mechanism, and protect the lock bar engagement. The Jinn's linerless design integrates those functions directly into the CF scale geometry and button lock mechanism, removing the liner weight entirely. The result is a handle that is 0.33 inches thick — thinner than most production folding knives regardless of material — at 2.25 oz total knife weight.

The Jinn H213-6A-GLOCF uses CPM-MagnaCut heat-treated to 61-63 HRC. MagnaCut was developed by Crucible Industries to deliver M390-level edge retention and wear resistance while achieving corrosion resistance that rivals steels built specifically for that purpose. At 61-63 HRC this is an exceptionally hard heat treat for MagnaCut — pushing edge retention and wear resistance toward the upper boundary of what the alloy is capable of. The DLC black coating adds a further layer of surface hardness on top of that heat treat.

The Wharncliffe profile has a flat cutting edge that runs straight from the handle to the tip while the spine drops steeply from the handle to meet it at an acute, low-profile point. This produces a blade geometry optimized for controlled, precise cuts — the flat cutting edge and acute tip are ideal for food prep, package opening, cord cutting, and any task where tip placement and edge control matter more than a curved edge's slicing arc. At 0.088 inches thick with a flat grind, the Jinn's Wharncliffe is the thinnest, most precise geometry in the blade's size class.

The Jinn H213-6A-GLOCF uses a pocket clip machined from titanium billet rather than stamped from steel. Titanium's strength-to-weight ratio allows a thinner, lighter clip geometry than steel while maintaining clip tension and wear resistance over extended use. The milled clip has a low-profile deep-carry geometry that positions the knife below the pocket mouth — only the top of the handle is visible when clipped. It is tip-up, right-hand only carry — there is no ambidextrous configuration on this model.

The Jinn Manual H213-6A-GLOCF measures 6.75 inches overall when open with a 3.0-inch blade at 0.088 inches thick. Closed length is 3.75 inches and handle thickness is 0.33 inches. It weighs 2.25 oz. The milled titanium clip is tip-up right-hand only.