Product Description

The ESEE-5/6 MOLLE Back fits both the ESEE-5 and ESEE-6 hard sheaths. Align the holes in the lower portion with the holes in the sheath and use the four screws and posts provided to securely fasten it to the sheath.

The top of the MOLLE back has an adjustable handle retention strap and a flap that slips over the pommel end of the knife and secures tight with the paracord and cord lock, a setup ESEE describes as making the sheath "jump safe." Both the top and lower portions have a built-in belt loop and MOLLE straps compatible with the military and LEO PALS system.

The top portion can be removed from the bottom portion by unsnapping the lower MOLLE strap and threading it through the plastic ring holding the two halves together. You can then thread the strap through the extra plastic ring (provided) before re-threading it through the lower cross straps. The extra ring lets you keep the extender capability when using only the lower portion.

Safety note: As with any MOLLE strap system, always thread the long strap under the last cross strap right above the snap to make sure the snap stays securely fastened. Failure to do so can result in unwanted release of the snap under extreme stress.

• Fit: ESEE-5 and ESEE-6 hard sheaths, mounted with four provided screws and posts
• Retention: Adjustable handle strap plus a pommel flap secured with paracord and cord lock
• Mounting: Built-in belt loops and MOLLE straps on both portions, compatible with military and LEO PALS
• Included: Mounting hardware, paracord, cord lock, and an extra plastic ring

Ideal for ESEE-5 and ESEE-6 owners who want modular MOLLE and belt carry. Made in the USA.

Add the ESEE-5/6 MOLLE Back (ESEE-52-MB-K) to your order today, with the fast shipping Knifeworks is known for.