Product Description
The Spyderco Navigator 3 SLIPIT brings back Sal Glesser's compact 1997 Navigator as a non-locking slipjoint for the first time, with an M390 leaf-shaped blade, gray G-10 scales, and a 1.7 oz carry weight. It is made in Maniago, Italy.
M390 (Böhler-Uddeholm BM390MC) is a powder-metallurgy stainless steel known for strong edge retention and good corrosion resistance. In practice, that means a small blade that stays sharp through everyday tasks like opening packages and trimming cord, and resists rust with basic care. The 2.32" blade is full-flat ground for clean slicing, with a refined spine for comfort. Spyderco notes the original Navigator descended from its early Co-Pilot model and later inspired the limited-production Navigator II in 2005.
- Blade: 2.32" M390 leaf-shaped blade, full-flat grind, satin finish, 0.108" thick, 1.88" plain cutting edge. 5.46" overall.
- Handle: Smooth gray G-10 scales over a full stainless steel backspring. 3.21" closed, 1.7 oz.
- Deployment + Lock: Spyderco Round Hole for ambidextrous one-handed opening. Non-locking SLIPIT slipjoint with a notched joint that holds the blade open under spring tension.
- Carry: Reversible deep-pocket wire clip for left- or right-side tip-up carry. Knife only; no sheath included.
Ideal for: office and urban carriers who want a small, low-key knife; travelers and anyone in areas where non-locking knives are preferred; and Spyderco collectors following the Navigator line since 1997.
Non-locking blade: The Navigator 3 is a slipjoint. Its blade does not lock open and can close if pressure is applied to the spine. Keep your fingers clear of the edge's path when cutting and closing. Knife laws vary, so check your local regulations before carrying.
Order the Spyderco Navigator 3 SLIPIT - 2.32" M390 Satin Full-Flat Plain Edge Leaf Blade, Gray G-10 Handle (C285GPGY) from Knifeworks, an authorized Spyderco dealer, with same or next business day shipping from Columbia, Louisiana.
Spyderco Navigator 3 SLIPIT: Frequently Asked Questions
Answers to the most common questions about the Spyderco Navigator 3 SLIPIT (C285GPGY).
Does the Spyderco Navigator 3 have a locking blade?＋
No. The Navigator 3 is a non-locking SLIPIT slipjoint. A notched joint and a full stainless steel backspring hold the blade open under spring tension, but the blade does not lock and can close if pressure is applied to the spine. Keep your fingers clear of the edge's path when cutting and closing.
What does SLIPIT mean?＋
SLIPIT is Spyderco's name for its non-locking slipjoint folders. They pair a traditional backspring mechanism with modern features like the Round Hole for one-handed opening and a pocket clip. Knife laws vary, so check your local regulations before carrying.
What is BM390MC steel?＋
BM390MC is Böhler-Uddeholm's designation for its genuine M390 powder-metallurgy stainless steel. It is known for strong edge retention and good corrosion resistance, which suits a small everyday carry blade.
Can the pocket clip be moved for left-hand carry?＋
Yes. The deep-pocket wire clip is reversible for left- or right-side tip-up carry.
What is included with the Navigator 3?＋
The knife ships with its deep-pocket wire clip installed. This is a knife-only listing, so no sheath is included. Packaging and contents are subject to change by the manufacturer.
What warranty does the Navigator 3 have, and where is it made?＋
Spyderco handles warranty service for this knife. Contact Spyderco directly for warranty terms and service. The Navigator 3 is made in Maniago, Italy.
M390 · Non-Locking SLIPIT · Made in Italy
Carry the Compact Spyderco Navigator 3
A 1.7 oz slipjoint with an M390 blade and a Round Hole for easy one-handed opening. Remember that the blade does not lock. Questions? Our team carries these knives daily. We ship same or next business day from Columbia, Louisiana.
Call 888-225-9775
Warranty Information
Spyderco Warranty: Contact Spyderco directly for warranty terms and service. Knifeworks does not warranty this product independently.Specifications
| Product Type | Folding Knife | |
| Brand | Spyderco | |
| Product Name | Navigator 3 SLIPIT | |
| Model # | C285GPGY | |
| Designer | Sal Glesser | |
| Overall Length | 5.46 | |
| Closed Length | 3.21 | |
| Blade Length | 2.32 | |
| Blade Range | 2-2.99 | |
| Edge Length | 1.88 | |
| Blade Thickness | 0.108 | |
| Blade Material | M390 | |
| Blade Style | Leaf | |
| Blade Grind | Full-Flat | |
| Blade Edge | Plain | |
| Blade Finish | Satin | |
| Handle Material | G-10 | |
| Handle Color | Gray | |
| Handle Finish | Smooth | |
| Opener | Spyderco Round Hole | |
| Lock Type | Slip Joint | |
| Clip Position | Tip-Up, Left or Right Carry | |
| Weight | 1.7 | |
| Origin | Italy | |
| Sheath | None | |
| Included | Knife with pocket clip |
