Product Description
The Manix 2 XL Salt C95GMCBKP2 is the all-black, large-format entry in Spyderco's Salt Series, built with highly corrosion-resistant materials for use in and around the water. A black DLC-coated CPM MagnaCut blade pairs with black G-10 scales and black-coated, corrosion-resistant liners, clip, and hardware.
CPM MagnaCut is a powder metallurgy stainless steel from Crucible Industries, designed to combine edge retention, toughness, and high corrosion resistance. It resists rust from salt water, sweat, and humidity while holding a working edge. The 0.125" drop point blade is full-flat ground for clean slicing, and a black Diamond-Like Carbon (DLC) coating adds a hard, non-reflective surface layer over the steel.
- Blade: 3.85" CPM MagnaCut drop point with a PlainEdge, full-flat grind, black DLC coating, 0.125" thick.
- Handle: Black G-10 scales, textured for secure grip; black-coated, corrosion-resistant liners and hardware; 5.09" closed, 5.09 oz.
- Deployment + Lock: Spyderco Trademark Round Hole for one-handed opening with either hand; a high-strength Ball Bearing Lock that left- and right-handed users can release the same way.
- Carry: Black reversible pocket clip for tip-up carry on the right or left side, plus a generously sized lanyard hole for tethered carry; 8.94" overall.
Ideal for: anglers, commercial fishermen, and marine professionals who want the Manix 2 platform in a larger blade format and low-glare, all-black build; tactical and outdoor users carrying in coastal environments; and ambidextrous users who want a lock that works the same in either hand.
The Spyderco Manix 2 XL Salt in black DLC CPM MagnaCut with black G-10 (C95GMCBKP2) ships same or next business day from Columbia, Louisiana. Knifeworks is an authorized Spyderco dealer.
Spyderco Manix 2 XL Salt: Frequently Asked Questions
Answers to the most common questions about the Spyderco Manix 2 XL Salt (C95GMCBKP2).
What lock does the Spyderco Manix 2 XL Salt C95GMCBKP2 use?＋
The Manix 2 XL Salt uses Spyderco's Ball Bearing Lock. When the blade opens, a spring-loaded ball bearing moves into place between the blade tang and the stop pin, wedging the blade securely open. To close, pull back the bearing's release tab on the spine of the handle and fold the blade, keeping your fingers clear of the edge. The lock works the same for left- and right-handed users.
What makes the Manix 2 XL Salt good for salt water?＋
Spyderco's Salt Series uses highly corrosion-resistant materials throughout. On this all-black version, the CPM MagnaCut blade has a black DLC coating, and the liners, pocket clip, and hardware are also made from corrosion-resistant materials with black coatings. Rinse the knife with fresh water and dry it after salt exposure to keep it in top condition.
What is CPM MagnaCut steel, and what does the black DLC coating do?＋
CPM MagnaCut is a powder metallurgy stainless steel from Crucible Industries, designed to balance edge retention, toughness, and high corrosion resistance. The black Diamond-Like Carbon (DLC) coating gives the blade a non-reflective finish and adds a hard surface layer over the steel.
How does this version compare to the standard Manix 2 Salt?＋
Both versions share CPM MagnaCut full-flat ground blades, Ball Bearing Locks, and corrosion-resistant Salt Series construction. The Manix 2 XL Salt (C95GMCBKP2) provides a larger 3.85-inch blade (compared to 3.37 inches on the standard Manix 2 Salt), a black DLC coating, all-black G-10 scales, and black-coated hardware for low glare and extended reach.
What comes with the Manix 2 XL Salt C95GMCBKP2?＋
The C95GMCBKP2 ships as a knife with its reversible pocket clip installed. It is knife only, with no sheath or lanyard included. Packaging and included items are set by Spyderco and are subject to change.
Where is the Manix 2 XL Salt C95GMCBKP2 made, and what warranty covers it?＋
This Manix 2 XL Salt is made in the United States. Spyderco warrants that its genuine products are free from defects in material and workmanship for the life of the product. The warranty does not cover loss, theft, accidents, abuse, misuse, improper sharpening, normal wear and tear, or alterations, and broken, lost, or bent metal clips are typically not covered. Shipping to and from Spyderco is the owner's responsibility. Contact Spyderco directly and include the Spyderco Warranty & Repair Form with any return. Knifeworks does not warranty this product independently.
CPM MAGNACUT · BLACK DLC · SALT SERIES
The Large-Format All-Black Manix 2 XL Salt
A 5.09 oz full-size folder with a 3.85" black DLC CPM MagnaCut blade, corrosion-resistant black hardware, and an ambidextrous Ball Bearing Lock. Questions? Our team carries these knives daily. We ship same or next business day from Columbia, Louisiana.
Call 888-225-9775
Warranty Information
Spyderco Warranty: Spyderco warrants that its genuine products are free from defects in material and workmanship for the life of the product. The warranty does not cover loss, theft, accidents, abuse, misuse, improper handling, alterations, neglect, improper sharpening, normal wear and tear, aftermarket or modified parts, or repairs by services not authorized by Spyderco, and broken, lost, or bent metal clips are typically not covered. If Spyderco finds a defect, it will repair or exchange the knife with the same, a similar, or an equal-value model. Shipping to and from Spyderco is the owner's responsibility. Contact Spyderco directly and include the Spyderco Warranty & Repair Form with any return. Knifeworks does not warranty this product independently.Specifications
| Product Type | Folding Knife | |
| Brand | Spyderco | |
| Product Name | Manix 2 XL | |
| Model # | C95GMCBKP2 | |
| Overall Length | 8.94 in | |
| Closed Length | 5.09 in | |
| Blade Length | 3.85 in | |
| Blade Thickness | 0.125 in | |
| Blade Material | CPM MagnaCut | |
| Blade Style | Drop Point | |
| Blade Edge | Plain | |
| Blade Grind | Flat | |
| Blade Finish | Black DLC | |
| Handle Material | G-10 | |
| Handle Finish | Textured G-10 | |
| Handle Color | Black | |
| Hardware | Black-coated, corrosion-resistant | |
| Lock Type | Ball Bearing Lock | |
| Opener | Spyderco Round Hole | |
| Clip Position | Tip-up, Left/Right carry | |
| Series | Salt Series | |
| Included | Knife with pocket clip (Knife Only, no sheath) | |
| Sheath | None (Knife Only) | |
| Weight | 5.09 oz | |
| Origin | USA | |
| Blade Range | 3.5–3.99 |
